Furnaces are offered, either sold as seen, or completely re-built.
Our offers are subject to the listed plant still being available at the time of you placing an order. If the furnace you need is not on our list, please contact us, as we may be able to locate plant suitable for your needs.
If you have furnace equipment for sale also contact us, as we are always looking for good used furnace equipment.
Furnaces supplied, if required, in 'AS NEW' condition, at a fraction of manufacturer's prices!
Prices are indicated for guidance, we will consider offers!!
Complete Ipsen TQFR - 5 - EM electrically heated heat treatment installation comprising:
2 - Ipsen TQFR-5-EM Electric sealed quench furnaces
! - Ipsen DL-6-E Tempering furnace
Ipsen Washing Machine, Loading cars, New control panel etc
This installation is available immdiately and is supplied fully checked and in full working condition with new ipsen control panels
Located in Germany
Price £150,000 GBP the whole installation.
Our Engineers can re-install if required.
An Ipsen DAC -6-ER electric tempering furnace rated at 40kw with fast cool facility
Max operating temperature 750oC, suitable for protective atmospheres
charge size 610mm x 910mm x 760mm high ( suit TQ4 - TQ6 Sealed Quench line)
A Complete Ipsen TQ -11 - GMR Heat Treatment installation
Due company re-location
Ready for immediate loading,
Charge size 910mm x 1220mm x610mm charge weight 1000 kilos
|Still in production up to the end of June 2014||Fitted with the latest Ipsen Recuperative burner system !||Located near to Birmingham UK|
Reasonable offers will be accepted !
1 off TQ-11-GMR Sealed quench furnaces with recuperative radiant tubes
1off Gas heated tempering furnaces
Washing machine, loading cars and tables etc. SSi atmosphere control
Below are pictures of the re-built TQ8 recently completed
We are offering this second furnace which is as good as a new Ipsen for less than half Ipsen prices, all work is carried out by Ex-Ipsen Engineers
All new motors, cylinders, control panel, re-wire, new control panel with Touch scrteen SSi Carbon control, In other words supplied in as near 'AS NEW' as possible.
IPSEN TQ-9-GM Sealed Quench Furnace
rebuilt in 2005 with new control panel incorporating
Ssi Automatic carbon control via an Oxygen probe
Fully automatic heat treatment cycle control va plc
Charge size 1220mm x 760mm x 760mm high
Will fit into a TQ7/8 line but has the extra loading height
OFFERS BASED ON £20,000.00
3 - JLS Front loading electric Ovens fitted with 12 Shelves
each 590mm x 590mm internal oven size 590 x 590 x 1180mm
rated at 18kw max temperature 300oc
Usual JLs Exceptional temperature uniformity
| A nice Barlow Whitney Gas Fired Batch furnace|
charge size 910mm wide x 760mm high x 1450mm front to back
Model GE1200HD, max temperature 1200oC
Brickwork in good order
Offers are invited
| Fired by two Stordy high velocity burners |
Firing above the charge. Honeywell burner management with
auto ignition and UV Flame failure safety
|A complete Aluminium heat Treatment installation comprising:- gas heated top loading solution and precipitation ovens, Water quench tank, loading frame and hoist, mezzanine 4 loading baskets etc|
Our Engineers have serviced these Ovens, and are available for re-installation
The installation comprises 3 top loading 550oC gas heated Ovens 2off EFCO and 1off JLS all desgned by Mr Les Field the ex Chief designer for JLS Engineering Ltd.
Offers arounf £35,000.00 are invited for the whole installation.
A compact 15" Shaker hearth furnace rated at 30kw, ideal for hardening small components
Output around 30 kilos/hour
Has been well looked after
AN ELECTRICALLY HEATED OIL QUENCH TANK
WORK DISCHARGES INTO A WORK BASKET BELOW THE OIL
|Sensible offers please||THE WORK BASKET IS LIFTED FROM THE QUENCH ELECTRCALLY|
|Protective gas mixing panel (nitrogen/Nat gas)|
A Nice Top loading VFC furnace
Manufactured By Birlec Australia
Rated at 30kw In super condition
560mm diameter x 560mm deep
|charge basket 430mm dia x 430mm deep|
| Birlec 18" (457mm) Mesh belt Conveyor furnace |
Suitable for Bright copper Brazing or Bright Annealing/normalising
Recent re-brick, to be supplied with new cooling chamber and conveyor belt
Offers based on £27,500 GBP
Mahler integral protective atmosphere generation system
Super Mahler 152mm (6") Hump back conveyor
Suitable for use with Hydrogen atmosphere for bright
annealing or bright brazing stainless steels and other materials
original cost 145,000 Euros we are looking for reasonable offers
Spares include a new coneyor belt
Company closure - sale of a COMPLETLY RE-BUILT Ipsen TQ-11-GM Sealed Quench Furnace and ancillary equipment
Charge size 910mm x 1220mm x 610mm high charge weight 1000 kilos
Re-build includes: Complete Re-brick, new muffle, new bearings/motors, all new cylinders complete re-wire, new control panel with Super Systems series 9200 and 9015 multi program automatic cycle and carbon control operated via a touch screen. Ethernet connections etc. A charge car and unloading car could also be made available
After re-build this is a TQ11 in 'AS NEW' condition
|Complete Re-brick new drive chains, new fan and tubes||New muffle also supplied|
|New control panels - our electrical Engineer is available for re-installation||Two TQ-11-GM furnaces on their way to their new home||priced at offers around £170,000 GBP - this is a bargain!!|
Two of the above Ipsen TQ 11 Furnace are now sold - only one left !!
WE are commencing re-build immediately, having completed the above two furnaces.
In addition we offer an Ipsen TQ-17-GM Sealed Quench furnace completly refurbished with loader and unloading car for £180,000GBP CHARGE SIZE 910mm x 1220mm x 910mm charge weight 1200kilos
Ipsen Endothermic generators
from the same site
all 2000CFH (56CuM/Hr)
refurbished with new SSi instrument and
Bosch lamda probe for automatic carbon control
|we offer these at £25,000GBP each|
A Birlec 2624 VFC furnace, Charge size 660mm dia x 610mm deep fitted with robust tubular elements fed via an air cooled transformer
To be supplied with a new control panel
A nice JLS Gas Fired OVen, Max temperature 300oC
Charge size 600mm wide x 1000mm high x 600mm deep
Sold with new control panel
HTS/SECO Gas nitriding furnace rated at 110kw
Charge size 48" dia x 36" deep (1220mm dia x 910mm deep)
New control panel
|SOLD||Sensible offers please|
Carbolite Electric TOP HAT furnace Ex Aerospace company max temperature
1200oC Charge size 1500mm x 1500mm x 1200mm high rated at 90kw
Eurotherm 2416 control Eurotherm 2312 overtemperature safety
3 zones - elements powered by crydon thyristors
ABB SM 500F paperless chart recorder
OFFERS (GUIDE £15,000 GBP) SOLD
Complete Aichelin heat treatment installation comprising 2 sealed quench furnaces, tempering furnace , wash and charger chamber size 500x900x650 . Charge weight 600 kilos
Atmosphere controlled by the use of oxygen probes to enable the furnace to
Harden,carburize,carburize and harden,carbonitride,anneal,normalize,ferritic nitrocarburize.
Both furnaces have auto ignition recuperative burner tubes on the gas combustion system.
“ water sensors in the oil bath
“ operate on an electro /mechanical system ie no air or ram seals operate
“ have in built control panels with chart recorders in place the oxygen probe panel being separate.
To complement this facility there is an hot gas fired aqeous dunk washing machine,one tempering furnace and a load/unload car.
Reasonable offers required Located in UK
Other Ipsen Equipment
Completely re-built by Ex-Ipsen Engineers Ipsen Sealed Quench Furnaces and ancillary items (chargers, Endothermic Generators, Washers, Tempering furnaces etc.,
TQ-7 - GM Sealed Quench Furnace
Price completely refurbished £160,000 GBP
|SSi control systems or Control system of your choice|
Ipsen TQ4 gas fired Sealed Quench Furnace refurbished including all new parts and complete re-brick with new control panel (SSi or equivalent)
Charge size 610 x 910 x 460mm charge weight 300 kilos
Guide: Budget £140,000GBP
We have a number of TQ4 furnaces in stock, together with Washing machines and temperaing furnaces of this size
Ipsen T4 sized Tempering Furnaces either Gas or Electric in stock
NEW ENDOTHERMIC GENERATORS
|All with SSi Auitomatic Carbon Control|
750, 1500, AND 2000 CFH
Priced at £33 - £37,000 GBP
IPSEN TQ37 SEALED QUENCH FURNACE INSTALLATION COMPRISING:
TQ37 SEALED QUENCH FURNACE, WASHER, TEMPERING FURNACE LOADER, UNLOADER, A NUMBER OF BASKETS
This furnace takes a load of 2 tonnes!
All electrically heated: Sealed Quench Furnace rated at 235kw
THIS FURNACE HAS ONLY BEEN USED AT LOW TEMPERATURE FOR AND IS IN EXCEPTIONAL CONDITION, SUITABLE FOR HARDENING/TEMPERING, CARBURISING, CARBO-NITRIDING, NITROCARBURISING ETC
CHARGE SIZE 1220mm x 1820mm X 610mm high, CHARGE WEIGHT 2000 kilos
PRICE NOW £120,000GBP the lot!
Two - Inductoheat Banyard Statiscan Twin station shaft hardening machines
rated at 100kw 30Khz. - 1 M scan up to 100mmdia
Touch screen CNC up to 500 programmes
In very good condition
Price OFFERS ARE INVITED
A 3000 CFH Endothermic Generator, gas heated
Maufactured by Thermal Basic is the USA, brought to the uk
by TRW, refurbished to UK standards then never used
OFFERS ARE INVITED
IPSEN T7 SIZE WASHING MACHINE COMPLETLY REFURBISHED I
OFFERS ARE INVITED. BASED ON £20,000.00
MAKE US AN OFFER ON THIS EXCELLENT PLANT!
IPSEN TQ8 -GM Sealed Quench Furnace
Completel re-build To include:
Complete re-brick, all new bearings, motors,drive chains, cylinders etc.,
Complete re-wire, New control panel etc.,
Can be supplied with either:-
Straight through Radiant tubes
Kanthal Electric Glo-bars
Radiant Tubes Price: From £120 - £160,000 GBP dependant on final spec
Ipsen T4 Sealed Quench Furnace in reasonable condition, sold refurbished as required with new control panels with Ssi control or equivalent. Alternatively we have in stock 2 off Marathon Monitor Carbpro control panels
Prices from: £70,000.00
IPSEN T4 Gas fired Tempering Furnace re-built to AS NEW condition 700oC
Ipsen Washing Machines::
|iPhotographs show impression of finished unit|
Pics shown before refurbishment
IPSEN TQ5 SEALED QUENCH FURNACE
|Supplied fully refurbished|
Birlec Batch Tempering furnace rated at 48 kw
suitable for use with inert atmosphere
(Nitrogen at the moment)
610mm x 914mm x 460mm
(24" x 36" x 18" high)
Refurbished unit guide £18/20,000 GBPSupplied with
new control panel. NADCAP standard
IDEAL FOR USE WITH IPSEN SOLD
Caskade Washing System with Vacuum drying
Rotary Wash, rinse, dry
Vacuum dry - ideal for components with holes
as vacuum will pull all moisture out and dry
Internally the washer is 'As New'
Takes 2 x 400 x 200 x 600 eurocrates
or 1 - 400 x 400 x 600 Eurocrate
Offers around £8,500 (worth more)
WE HAVE OTHER IPSEN EQUIPMENT IN STOCK, CHARGERS, UNLOADING CARS ETC - PLEASE LET US HAVE YOUR REQUIREMENTS.
ALL IPSEN EQUIPMENT IS RE-BUILT BY EXPERT FURNACE ENGINEERS, WITH OVER 30 YEARS EXPERIENCE IN THIS SPECIALIST FIELD. INSTALLATION AND COMMISSIONING CAN BE ARRANGED
WILD BARFIELD AUSTEMPERING LINE COMPRISING AN 18" (460mm)SHAKER HEARTH FURNACE RATED AT 60kw, IN LINE SALT BATH, WASHER, AND DRYER
|PRICE: OFFERS BASED ON £15,000 GBP SOLD|
COMPLETE HARDEN, WASH AND TEMPERING LINE FOR BOLTS OR OTHER SUITABLE COMPONENTS OUTPUT 700 KILOS/HOUR
STILL INSTALLED, NEW CONTROL PANEL INCORPORATING TELMAG COMPUTOR WITH DOWN LOAD FACILITIES TO SCADA SYSTEM
COMPRISING 915mm WIDE SHAKER
HEARTH HARDENING FURNACE,
QUENCH TANK, WASHER,
915mm WIDE MESH BELT
OFFERS BASED ON
£35,000 GBP EX WORKS
New non -ferrous melting furnaces built to your specification
Bale out or tilting. Gas, oil, or electrically heated
up to 40tonne melting furnaces for recycling also
COOK AND KNIGHT 4000 CFH EXOTHERMIC GENERATOR STILL INSTALLED CAN BE
£8,000.00 REFURBISHED AS NECESSARY
EFCO VACUUM ASSISTED ELECTRIC BELL FURNACE EX AEROSPACE COMPANY. Charge size 970mm dia x 1750 high, vacuum purge system, used with Nitrogen/hydrogen atmosphere Edwards E1M40 rotary vacuum pump, excellent condition. Ex Rolls Royce where it was used for Bright Stress Relieving/annealing max temperature 650oC
This furnace could easily be converted to a Nitrider.
VFC TEMPERING FURNACES all 700oC, TOP LOADING
2 OFF BIRLEC ELECTRICALLY HEATED AT 40kw VFC TEMPERING FURNACES TO BE SUPPLIED WITH NEW CONTROL PANELS
CHARGE SIZE 26" DIA X 24" DEEP (660mm Dia X 610mm DEEP) EX ROLLS ROYCE IN EXCELLENT CONDITION.
GUIDE £8,500 EACH
NEW 250oC Gas Fired Oven, manufactured by AIRFLOW
Size 1500mm wide x 2000mm high x 1000deep rated at 60kw
NEW OVENS BUILT TO YOUR SPECIFICATION
Electric Typical Oven with manual rise and fall door
Gas heated 550oC Oven with electric rise and fall door.
Rapid drop bottom quench furnace for aluminium solution treatment
furnace, to NADCAP Standards built for Alloy Heat Treatments.
|front loading Oven with swing aside door|
JLS Tempering/Solution Treatment Ovens, Gas fired, 300 and 550oC, various sizes
Price range guide £3,000 - £7,000
Large stock of low temperure Ovens,
Barlow Whitney, JLS, Wild Barfield etc - let us know your requirements.
All new pneumatic parts, motors, bearings etc
Ipsen Pusher type
Quench, Wash and Tempering Line
ONLY USED FOR 12 Months!
Electrically heated, ideal for continuous production
Output:-: Hardening and tempering 700 kilos/hour
Carburising 350 - 600 kilos per hour
New cost over £1.2 MillionGBP
Price £215,000 GBP ex works
We have just completed the complete re-build of an Ipsen TQ - 8 - EM Sealed Quench Furnace, and we have in our workshops and second Ipsen TQ8 Sealed Quench Furnace which we have commenced re-building.